CBR600RR Oil Change And Capacity Instruction

Are you looking to keep your CBR600RR running strong and perform regular maintenance? A good place to start is with an oil change. But, do you know what type of engine oil you should use on your CBR600RR? Do you know how much oil you need each time you’re heading to change the oil?

So, many questions but the answers are in one place. Yes, you just stepped in the right direction. From the CBR600RR oil change schedule to the DIY oil changing process, we’ve covered every single thing regarding CBR600 engine oil and its surrounding parts.

When you’re itching to start tearing it up on the track, keep calm and change the oil first. To do so, our CBR600RR oil change guide and capacity instruction is here for you.

How to check the oil level CBR600RR

You’ve just got your new CBR600RR, and you’re anxious to take it for a spin.
There are a few things you need to check before you do. One of those is the oil level. However, checking the oil level is a relatively easy process that only takes a few minutes. Here’s how to do it:

Step 1:

This will ensure that the bike is level for checking. If the bike is tilted, it may interrupt the actual oil level.


On the left side of the engine, there is a small plastic piece called a dipstick. It’s usually black. It’s located just under the oil filler cap. Generally, a dipstick has a triangle and a number. The number represents how many quarts of oil you have left in your engine.


Remove the engine oil cap and pull out the dipstick. After that, clean it off with a fresh cloth.


Reinsert the dipstick and pull it out again. The oil level indicator on the stick needs to be checked. It will be almost flush with the surface when it’s properly filled. Ideally, the oil level stays at the center between “L” (low) and “F” (full) marks. If the oil is not at the right level, add more oil. If it isn’t, you need to add more oil.


Replace the engine oil cap and tighten it securely. In case, you’re having trouble, you can use a socket wrench.


If the oil level is low, start the engine and let it warm up for a few minutes. Then check the oil level again and add more oil if necessary.

Necessary Parts and Tools for CBR600RR oil change

Changing the oil on a CBR600RR is a necessary task that should be performed at least every 6 months, or 7,500 miles. In order to change the oil on a CBR600RR, you will need certain parts and tools.

  • First up, you’ll need an oil pan to catch the old oil, a new filter, and at least 6 quarts of new oil.
  • The type of oil you use is up to you, but most people stick with 10W-40 or 5W-30. And yes, keep a funnel with you for pouring the engine with new oil properly.
  • You’ll also need some basic tools, including a socket wrench set, a Phillips head screwdriver, and a torque wrench.
  • The socket wrench set will come in handy for removing the drain plug from the engine, while the Phillips head screwdriver can be used for removing the old filter.
  • The torque wrench is necessary for properly tightening the new filter.
  • Finally, you’ll need something such as soft cloth or towels to clean up the mess made by the old oil.

CBR600RR Oil Capacity

Due to the incredible popularity of the CBR600RR sports bike, Honda has introduced a different version of this model over the last 15 years. Even though there is no significant difference in oil capacity for each version, we’ll mention their oil capacity separately to catch up with your model year.

2003 Honda CBR600RR Oil Capacity3.1 US Quarts or 2.9 Liters
2004 Honda CBR600RR Oil Capacity3.1 US Quarts or 2.9 Liters
2005 Honda CBR600RR Oil Capacity3.1 US Quarts or 2.9 Liters
2007 CBR600RR Oil Capacity3.7 Quarts or 3.5 Liters
2008 Honda CBR600RR Oil Capacity3.7 Quarts or 3.5 Liters
2009 CBR600RR Oil Capacity3 US Quarts or 2.8 Liters
2011 CBR600RR Oil Capacity3 US Quarts or 2.8 Liters
2012 CBR600RR Oil Capacity3 US Quarts or 2.8 Liters
2013 CBR600RR Oil Capacity3 US Quarts or 2.8 Liters
2014 Honda CBR600RR Oil Capacity3 US Quarts or 2.8 Liters
2015 CBR600RR Oil Capacity3 US Quarts or 2.8 Liters
2016 Honda CBR600RR Oil Capacity3 US Quarts or 2.8 Liters

CRB600rr Oil Change Intervals

It’s no secret that a 600cc sports bike is a serious performer. With such power on tap, it’s important to maintain your bike properly in order to ensure long-term reliability and performance.

Like all bikes, it needs regular care and attention to keep it running smoothly. One of the most important aspects of bike maintenance is changing your engine oil regularly. But how often should you change your CRB600rr engine oil?

There isn’t a definitive answer, as everyone’s riding style and conditions are different. However, most experts recommend changing your engine oil every 3,000 miles or every 3 months, whichever comes first. This will help keep your engine running smoothly and prevent any serious damage from occurring.

CBR600RR Oil Type and Weight/Viscosity

Choosing the right oil type and weight viscosity for your CBR600RR is an important part of motorcycle maintenance. Viscosity ratings can be confusing, so we’ve put together a comprehensive guide to help you choose the right oil for your CBR600RR.

The ideal oil type and viscosity for your CBR600RR depend on a few factors, including your riding style and climate. However, engine type and category is the major determinant for choosing the right engine oil.

CBR600RR engine requires a thicker oil with a high viscosity in order to provide the bike with good performance oil and to prevent damage to the engine. According to Honda, the recommended oil type and weight/viscosity for CBR600RR is Synthetic 10W4 oil.

Since the CBR600RR lineup has several versions, we’re going to mention the oil type for each specific model year so that users can easily find out the recommended type.

  • 2003 Honda CBR600RR oil Type – Synthetic (SAE 10W40)
  • 2004 Honda CBR600RR oil Type – Synthetic (SAE 10W40)
  • 2005 Honda CBR600RR oil Type – Synthetic (SAE 10W40)
  • 2006 CBR600RR fork oil Type – Synthetic (SAE 10W40)
  • 2007 CBR600RR oil Type – Synthetic (SAE 10W40)
  • 2008 Honda CBR600RR oil Type – Synthetic (SAE 10W40)
  • 2009 CBR600RR oil Type – Synthetic (SAE 10W40)
  • 2011 CBR600RR oil Type – Synthetic (SAE 10W40)
  • 2012 CBR600RR oil Type – Synthetic (SAE 10W40)
  • 2013 CBR600RR oil Type – Synthetic (SAE 10W40)
  • 2014 Honda CBR600RR oil Type – Synthetic (SAE 10W40)
  • 2015 CBR600RR oil Type – Synthetic (SAE 10W40)
  • 2016 Honda CBR600RR oil Type – Synthetic (SAE 10W40)
  • 2018 CBR600RR oil Type – Synthetic (SAE 10W40)

Why 10W40 Oil is Recommended for CBR600RR?

Motorcycle engines are designed to run with a weight of oil called 10W40. This is a reference to two properties of the oil: its ability to flow at low temperatures (the “W” number) and its ability to provide protection at high temperatures (the “40” number). 10W40 oil is a good choice for most motorcycle engines, especially those in sports bikes like the Honda CBR600RR.

There are a number of reasons why 10W40 oil is recommended for the Honda CBR600RR. The first reason is that this weight of oil provides good protection against wear and tear, especially in high-performance engines like the CBR600RR.

10W40 oil also helps to keep the engine clean and running smoothly, which is important for a bike that is used frequently for racing or other high-intensity activities.

This oil is able to provide good protection at high temperatures and helps keep the engine running smoothly even when it’s under a heavy load. Additionally, this weight of oil is relatively easy to find at most automotive stores, making it a convenient option for those who need to do an oil change on short notice.

CBR600RR Oil Change Cost

When the CBR600RR oil change schedule comes in, riders think about the actual cost of that service. However, the cost of the oil change can vary depending on the type of oil used, the location where it is done, and any additional services that are performed.

The cost of the oil change can also vary depending on whether it is a scheduled service, or if it is performed as an emergency. In general, the cost of an oil change for a CBR600RR will range from $30 to $60.

Honda CBR600RR oil filter Details

One of the most important pieces of equipment on any motorcycle is its oil filter, and the CBR600RR is no exception. Honda CBR600RR uses an oil filter to keep the engine clean and running smoothly. Every time when CBR600RR oil change schedule comes in, you have to give an extra layer of attention to this small part.

In 2012, the CBR600RR received a major redesign which included a new engine and frame. This redesign required a new oil filter. The oil filter on the 2012 CBR600RR is unique in that it is a cartridge-style oil filter.

Till now, the most common type of oil filter used in a Honda CBR600RR is the cartridge-type filter. This filter is a small, cylindrical cartridge that screws into the engine case.

It has a large hexagonal nut on the end that can be turned with a wrench to remove it. The filter media is made of pleated paper and is designed to catch contaminants in the oil before they can enter the engine.

CBR600RR Oil Filter Location

The CBR600RR oil filter is located at the bottom of the engine near the front wheel. The oil filter is held in place with a bracket and two bolts. This filter can be replaced without removing the exhaust system or the fuel tank.

CBR600RR Oil Filter Part Number

The CBR600RR is one of the most popular sports bikes on the market, and as such, has many aftermarket parts available for it. One of these parts is an oil filter. The oil filter part number for the CBR600RR depends on the year of manufacture.

The oil filter for a 2003 CBR600RR has part number 15410-MW0-000. For a 2004 model, the part number is 15410-MW1-000. For 2005 models, it is 15410-MW2-000. And for 2006 models and later, it is 15410-MW3-000.

CBR600RR Oil Drain Plug Details

The CBR600RR oil drain plug is a small, black, circular component. On the left side of your bike, just below the clutch lever, there’s a small hole. This is where the oil drain plug is located.

It’s designed to allow oil and gas residues to be expelled from the engine while it’s being ridden. Over time, residue build-up can cause the plug to become blocked, which will prevent oil from being drained and can eventually lead to an engine seizure.

If your bike was made in 2004 or earlier, then it has a 12 mm hexagon-shaped oil drain plug. However, if your bike was made in 2005 or later, then it has a 17 mm hexagon-shaped oil drain plug. This oil drain plug is made of brass and has a rubber O-ring seal. The plug is tightened with a torque wrench to 10-newton meters.

How To Change CBR600RR Oil Step By Step

If you’re like most motorcycle owners, you probably don’t think about changing your oil until it’s absolutely necessary. And even then, you might only have a vague idea of how to do it. However, when a CBR600RR oil change schedule comes in, you can prefer a DIY process to save some extra bucks.

Don’t worry, we’re here to guide you. In this article, we’ll show you how to change the oil on your Honda CBR600RR. We’ll walk you through each step of the process so that you can do it easily and get back on the road as soon as possible after your service is complete.

Step 1: Gather the supplies you will need

Changing your CBR600RR oil is actually a pretty simple process that only requires a few basic tools. First of all, gather the supplies you’ll need. These include:

  • An old rag or clothes
  • Container
  • New oil
  • Oil filter
  • Funnel
  • Socket wrench set
  • Pliers

Step 2: Drain the old oil

The next step is to drain the old oil. The oil drain plug is located at the bottom of the bike. Unscrew it with a socket wrench and drain the old oil. Be careful not to spill any oil on yourself or your clothes, as it can be very slippery.

Gently wipe off any excess oil that falls out of the bottom of the CBR600RR. Allow the oil to drain completely before moving on to the next step.

Step 3: Remove the oil filter

The oil filter is typically located near the engine, and it will have an oil filter cap or cover. Remove the cap or cover and unscrew the filter with a socket wrench by turning it counterclockwise.

Be careful not to damage the seal on the filter. Set the old oil canister away from where you’re working so as not to get any dirt or dust into your CBR600RR’s engine. Once the filter is loosened, pull it straight out and discard it.

Step 4: Install the new oil filter

Next, apply a thin layer of new oil to the seal of the new filter, this will help create a seal when you install the filter. Then screw it in place by turning it clockwise. Reattach the cap or cover to the filter housing. Thread the new filter onto the engine by hand until it’s tight.

Step 5: Pour in the new oil on your CBR600RR

Next, use a funnel to pour the new oil into the engine. The recommended amount of oil varies depending on your make and model of bike, so be sure to check your owner’s manual for the correct amount.

Step 6: Check for leaks

The process of checking for oil leaks after changing your bike’s oil is a simple but essential one. You will need to follow these in order to ensure that you have properly checked your bike for any leaks.

First up, visually inspect the area around the drain plug and the area where the new oil filter was installed. Then, you will need to check for any leaks by placing some newspapers or cardboard under the bike.

Now, start your bike and let it run for a few minutes. Once done, the newspapers or cardboard for any evidence of leaked oil. If you do find evidence of a leak, you will need to take your bike back to the shop where it was serviced and have them take a look at it.

CBR600RR Oil Change Video

Still hesitant about how to change the oil on your CBR600RR? Luckily, there’s a great video that shows you how to do it yourself. This video from Bros FOURR Speed is easy to follow, and it’ll save you time and money.


It is important to know how and when to change the oil in your CBR600RR, as well as what the capacity is for the oil. Take your time, and when the CBR600 oil change schedule comes up, follow the steps outlined in this article. You can complete the job without any issues. Be sure to also check your motorcycle’s owner’s manual for the correct oil weight and capacity for your specific bike.