Best Oil For Honda Cbr600rr – Top 5 Picks

“I’m a Honda CBR600RR bike user, and I’ve always wondered what the best oil for my bike is. After some research, I found that many different types of oils are available on the market that all offer their own advantages.

The key to finding the best oil for me was to know what kind of riding I do most often.” I’m sure you’ve never heard of this, but I’ve got some insider info on the best oil for your Honda CBR600RR.

It’s a little-known fact, but what you use in your engine can make it last longer or prematurely fail. You could be living with an expensive mistake!

This blog post will tell you everything you need to know about how the right oil makes all the difference.

Best Oil For Honda Cbr600rr

Little Bit About Honda CBR600RR Engine


The Honda CBR600RR is a 600 cc class sport bike made by the Japanese manufacturer Honda since 2003.

It is often referred to in the American press as the CBR600, though this is incorrect. The European model was named CBR600RR in recognition of Honda’s RC211V MotoGP bike.

The engine uses a DOHC valvetrain layout with 4 valves per cylinder. The intake valves are 38 mm in diameter, while the exhaust valves are 33 mm in diameter.

Each cylinder has a volume capacity of 279 cc. The compression ratio is 12.3:1 for models between 2002 and 2004, 12.5:1 for 2005-2006, and 12.4:1 starting in 2007 due to revised cam profiles with higher lift and more extended overlap periods during valve operation,

increasing maximum efficiency power output by around 3% over the previous model. The firing order is 1-3-2 at 3600 rpm, and the redline is 14,400 rpm.

A single Honda CBR600RR (cubic centimeter per revolution) carburetor feeds fuel from the tank, and its maximum power output is 102 bhp (76 kW).


According to the Owner’s guide line, Recommends 10W30 grade oil for CBR600RR. But you Choose 5W/30 or 10W/40.

Recommended Oil type for Honda CBR600RR

Honda has only published recommendations for Honda CBR600F4i, derived from CBR600RR’s VTR1000 Firestorm engine (called RC51 in EURO countries).

And it specifies 10W/40 as recommended engine oil. The same engine is used in CBR600RR, but it has different specs and ECU settings for Power mode (Power Hungry Mode) or fuel economy mode (Urban Mode).

What would happen if you used 10W/40 motorcycle oil in a high-speed performance bike like CBR600RR? Well, I bet good engine performance and excellent power output because 10W/40 can act as a thicker oil when you are in low-speed riding. And it will act thinner when the bike rev’s up to high speed.

Best Oil For Honda Cbr600rr


Here Are 5 Picks from experts’ suggestions and customer reviews. Please check the list and hope that you will find your favorite one here:

#1 – 2008 HONDA HP4S CBR600RR/RA OIL CHANGE KIT- Editor’s choice

1. 2008 HONDA HP4S CBR600RRRA OIL CHANGE KIT Editors choice

Honda HP4S CBR600RR RA oil is one of the best oils on the market. Compared with conventional oils, HP4S offers lower friction and better oxidation resistance.

So if you want to update your old bike for a smoother ride, this is a product worth looking at.
Honda HP4S CBR600RA oil is one of the best oils on the market. Compared with conventional oils, HP4S offers lower friction and better oxidation resistance.

Pros:

  • Full Synthetic Oil Has Better Performance than Conventional Oil
  • It Can Be Used in All Seasons and for all Engines, Including Turbocharged and Supercharged Engines.
  • The PAG80 HP4S has less friction than previous oils because it is light and has a low viscosity.
  • For better high-heat Performance, allow for more oxidation resistance.
  • Worked well for all CBR 600rr
  • Average Rating:4.9 out of 5 stars

Cons:

  • Expensive Product Compared to Conventional Oils
  • Cannot be used with Fuel Injection Systems, Only Suitable for Carbureted Engines.

#2 – Valvoline 4-Stroke Motorcycle SAE 10W-40 Motor Oil

Best Oil For Honda Cbr600rr

No matter what you’re looking for in oil, Valvoline has something that will work. Whether your engine needs a little TLC or it’s screaming at you to change the fluid, some oils are designed for exactly what you need.

Introducing heavy-duty 4 stroke motor oil – engineered with advanced technologies and cleaning agents to help keep engines running strong.

This product also contains high levels of shear-stable viscosity improvers, so your engine fluids maintain the right kind of thickness throughout wear cycles, even in higher temperatures meaning fewer leaks or breakdowns when needed most.

Valvoline 4-Stroke Motorcycle SAE 10W-40 Motor Oil

In addition, with patented silicone additives, protection from combustion byproducts that cause corrosion is assured while being affordable enough to be used daily without sacrificing Performance.

Pros:

  • Inexpensive and great quality oil
  • Contains many chemicals to help protect any engine.
  • Can be used regularly to help keep any engine running strong.

Cons:

  • Not as effective at protecting a neglected engine over a period of time.
  • Needs to be changed frequently

I personally like this oil because it is affordable and it does what it needs to do. As long as you take care of your engine, this oil will keep it running strong.


#3 – Honda GN4 10W-30 Motorcycle Oil – Gallon

Honda GN4 10W-30 Motorcycle Oil

Honda’s GN4 10W-30 Motorcycle Oil provides quick and smooth lubrication, reducing wear on parts. Made for engines that today’s motorcycles demand, Honda delivers exceptional Performance with factory-approved viscosity stability to keep your engine running like new. For use with motorcycles that comply to JASO FC or ISO EGF standards.

Honda 10W-30 Motorcycle Oil benefits:

  • High-Performance Engine Oil,
  • cylinders and bearings are well protected against wear and corrosion.
  • Honda 10W-30 Motorcycle Oil for Honda’s new era of engine technology with viscosity stability to keep your engine running like new.
  • Excellent Quality Motor Oil is made to meet the requirements and stresses of a new era of engine technology.
  • Outstanding Performance Excellent quality motor oil made for engines that today’s motorcycles demand. Honda delivers exceptional Performance with factory-approved viscosity stability to keep your engine running like new.

Honda 10W-30 Motorcycle Oil cons:

  • non-synthetic oil
  • can cause incompatibility to certain materials.
  • It can’t be shipped by air or international express, Cannot be sold outside the USA.

Overall I like Honda GN4 10W-30 Because of my motorcycle is a Honda GN4 10W-30 Motorcycle Oil-based engine. it’s high-performance engine oil, excellent quality motor oil made to meet the requirements and stresses of a new era of engine technology. Viscosity stability and cleanliness meet the requirements and stresses of a new era of engine technology.


#4 – Castrol 06400 Actevo Xtra 10W-30 4-Stroke Motorcycle Oil

Castrol 06400 Actevo Xtra 10W-30 4-Stroke Motorcycle Oil

The Castrol Actevo Xtra is formulated with Rezone technology to protect all 3 critical zones in the auto engine.

10W-30, this oil maintains viscosity under high temperatures for superior protection of engines and transmissions.

Castrol 06400 Actevo Xtra 10W-30 4-Stroke Motorcycle Oil

Easily finds leaks thanks to dyed additives that help mark difficult areas without needing to remove a clean filter. For use when taking long trips or when higher temperature conditions are expected, this affordable product balances excellent Performance at a low cost.

Pros:

  • Low price and good Performance
  • Able to cover long periods of use without requiring oil changes.
  • Best for long trips.
  • high-temperature oil
  • Affordable price.
  • synthetic oil

Cons:

  • Not for use in cold temperatures.
  • Maybe not Good For Big Bike

Castrol 06400 Actevo Xtra 10W-30 is fantastic oil. I personally Like this because it can cover long periods of use without needing oil changes.

This is the Highest temp I used on my motorbike. I like it due to its synthetic oil performance.

The price is low, so I’m using this oil for my bike. I will recommend using it if you are taking long trips or have high longevity.


#5 – HONDA CBR600RR/RA OIL CHANGE KIT

HONDA CBR600RR/RA OIL CHANGE KIT

HONDA CBR600RR/RA oil is a semi-synthetic 10W/40. This oil Honda Recommended and is a very good oil. It is best to fill the engine with this oil as it gives a lubrication advantage for this type of motorcycle. Perfect for DIY bikers.

Pros:

  • Suitable for both on and off-road use.
  • Very good oil for this bike.
  • HONDA Recommended
  • Affordable price
  • Perfect for DIY bikers

Cons:

  • A little bit pricey.

This product is HONDA recommended, which is the highest praise that can be given to an oil. It comes in a 3-liter container, perfect for someone who does 7500 km per year on average.

FAQ About best Oil For Honda cbr600rr


Q: I have a 2003 CBR600rr. What is the best oil weight to use?
A: The manual says 5w40, but you may be able to get away with something lighter. If you’re using synthetic, it might be OK up to 10w30.

Q: What oil does a CBR600RR take?
A: It takes SAE 10W-300 motor oil.

Q: I have a 2002 CBR600rr; what kind/weight oil should I use?
A: Use weight 10W-40 or 10w30 synthetic. If you are using conventional, then follow the manual.

Q: What is the weight oil for cbr600rr?
A: All models are designed to use 10W-40 OR 10W-30 motor oil.

Q: What is the best oil weight for a 2003 CBR600RR?
A: 5w40 or 10w30 synthetic

Q: What type of oil does a CBR600RR take?
A: The owner’s manual recommends SAE 10W-30 motor oil.

Q: What does engine oil do?
A: Engine oil lubricates moving engine parts (like cams, crankshafts, rods, pistons) so that they can move smoothly. It also cleans any metal filings that come out of the engine and keeps them from going into parts of the engine where they would do damage.

Q: What happens if I run my bike without oil?
A: Your bearings will wear down to a nub very quickly, not only leading to Poor Performance but also risking seizure and killing your engine.

how to change oil cbr600rr

You know that regular maintenance is key to keeping your bike running smoothly. One important part of maintaining your bike is changing the oil regularly. Here’s a step-by-step video on how to change the oil in your CBR600RR.

Conclusion


You can find many things to use as a motorcycle oil, but we’ve found that the best oils for Honda CBR600RRs are those which have been specifically designed and tested for this particular make and model.

If you need help deciding on what type of oil is suitable for your bike or if you want personalized advice from our experts, please feel free to reach out to us at any time by comment section. We look forward to hearing from you soon!

Related Post You May Like: